1.DRAGER 6850645-22 oxygen sensor O2 cell
Replacement Drager Babylog,Fabian,Cicero,PM8030,Evita,Oxydig, Anemone,Oxycom ,Incubator 8000,MO8 ST13, MAX11, Invivo Manitude,10-103-07, PT14A, Teledyne C13 C-61139, Hudson 5557(V14),VTI 101372,100352
Description
Drager's years of experience in the field of sensors, and their high quality has even convinced NASA. Drager O2 sensors are electrochemical transducers used to measure O2 partial pressure. They operate on the principle of a galvanic cell.
Technical Specifications
| Measuring range |
0-100% |
| Accuracy |
+/-2% of full scale |
| Signal output |
10-14mV |
| Linearity |
+/-2% of full scale |
| Response T90 |
13 sec |
| Temp Coefficient |
compensated |
| Shelf Life |
6 months |
| Humidity Non-condensing |
0-99% RH |
| Operating Temp |
0 to 40℃ |
| Recommended storage |
0 to 25℃ |
| Expected Life |
60 months |
| Warrangty |
18 months |
| Electrical Connector |
gold plated slip rings |
Oxygen sensors have the important task of measuring and monitoring the inspiratory and/or expiratory O2 concentration in anesthesia and respiratory devices. Oxygen sensors from Drager satisfy the highest national and international requirements. Furthermore, they have been extensively tested and fine-tuned for proper functional performance with Drager devices and systems.
If you are interested above products,you can send inquiry as follow:
E-mail: jenny@upnmed.com
Whatsapp:+8613670105485
*Disclaimer: All the registered trademarks, product names, models, etc. shown in the above contents are owned by the original holder or the original manufacturer. This is only used to explain the compatibility of the UpnMed products, and nothing else! All the above information is for reference only, and should not be used as a working guide for medical institutions or related units. Otherwise, any consequences will be irrelevant to the company.
